Explosion proof and non-explosion proof vents are available to give you full control of the volume and frequency of air changes inside your hazardous material building. Find your ventilation solution today.
Break Glass Emergency Shut-Off
The oil tight, water tight and dust tight Break Glass Emergency Shut-Off allows the Emergency Break Glass Operator to perform in harsh chemical environments as well as coastal area environments. The Break Glass Emergency Shut-Off is a device in which uses a “break glass to release button” model to which then controls emergency shut-off, stop, shut-down or any other control such as: HVAC, BOILER, POWER, VENTILATION, FUEL, GENERATOR, GAS or EXHAUST. When the glass is broken with the stainless steel hammer (stainless steel hammer is attached to a retaining chain and a holder), the button returns to a relieved extended position. The Break Glass Emergency Shut-Off gives you options to for two installation methods, both flush and surface mount applications. The box is held together with four stainless steel screws.
Calibration Kit- Dräger Polytron
US Chemical Storage is committed to providing safe, secure and extremely strong chemical storage buildings. Sensors are critical with regards to storing chemicals that can give off toxic gasses. The digital reading Dräger Polytron sensors are designed to run 24 hours a day and commit to measurement performance of gasses, temperatures, and pressure compensation. The integrated sensor memory consists of all relevant sensor data. The Dräger Polytron is able to detect over 100 different gases for maximum safety. With the Dräger Polytron being maintenance free, you can be sure that the Dräger Polytron will always demonstrate optimum performance.
EP Mechanical Ventilation Air Flow Sensor with Alarm
Our Mechanical Ventilation Air Flow Sensor is Explosion Proof with a weatherproof horn/alarm that sounds when air flow stops. The explosion proof mechanical ventilation air flow sensor with alarm has a mass flow switch for the mass flow rate detection of liquids and gases, and a wide operating temperature range of -100 °F to +850°F. The Mechanical Ventilation Air Flow Sensor with Alarm is UL Listed Class I, Groups C and D, Class II, Groups E, F, and G. A Two Year Workmanship Warranty is available. .
Fire Alarm Panel
The Fire Alarm Panel is a compact and intelligent control panel that will address detectors or any type of modules. The Fire Alarm Panel is essentially the controlling component of a Fire Alarm System. The panel acquires information from environmental sensors equipped to detect changes associated with fires. The highly responsive and intelligent fire alarm panel transmits system status such as alarms, troubles, AC loses etc… The Fire Alarm Panel’s power supply and electronics are integrated onto a single circuit board. Fire Alarm Panel has a built in digital alarm communicator transmitter. The user interface has a built in digital alarm communicator/transmitter, integral character LCD display with backlighting and key pad, audible or silent walk test capabilities, real-time clock/calendar with automatic daylight savings time.
Fire Alarm Pull Station - Non-EP w/ Bell
The Fire Alarm Pull Station – Non-EP w/ bell is a wall-mounted, square shaped device that usually has a T-shaped lever in the middle. The device protrudes from the place of installation and is most often colored red. The Fire Alarm Pull Station is a non-explosion device with an alarm like sounding bell. This wall-mount is connected to an alarm device that sounds with an audible alarm when the lever is pulled manually with a downward motion. The fire alarm pull station is critical for emergency devices and for alerting members of a work environment promptly.
Gas Detector - Non EP
When dealing with chemical storage, toxic gasses may be put off into the air that can be hazardous. A Non-EP Gas Detector is critical to finding The Non-Explosion Gas Detector detects toxic gas that may be transmitted. The non-explosion proof gas detector is designed for use in chemical storage buildings that are not used to store combustible or flammable chemicals. Different from the explosion proof gas detectors, the non-explosion proof gas detector is not built to withstand an internal explosion and has not been explosion rated.
Gas Detector - Acidic Compounds
The Acidic Compounds Gas Detector is an explosion proof gas detector for continuous monitoring of toxic gases and oxygen in the air. Designed for a one-man calibration, self-test features and offers a variety of diagnostics. Configuration and calibration features of the transmitter are menu guided and easy to use. Extremely high sensitivity and dependability is with no false alarms makes this third generation acidic compound Gas Detector very reliable. The Gas Detector has very fast and accurate responses with non-intrusive calibration. Additional features including the backlit LC-Display, makes the Gas Detector clear to read and user friendly.
Gas Detector – Chlorine
Chlorine (CI2) is a naturally occurring, highly reactive gas used for production and disinfectant. Chlorine is very poisonous and 2.5 times heavier than air is. The Gas Detector has an audible, visual and vibrating alarm and takes CR2 Lithium batteries for maximum reliability. With a single button, replaceable battery, and IP67 Rated, and completely water and dust resistant our chlorine gas detector is extremely durable and has superior performance capabilities. Back-lit LCD allows you to easily read the back-lit screen. The Chlorine Gas Detector also includes event and data logging.
Gas Detector - Dräger Polytron IR
The Gas Detector Dräger Polytron IR is an explosion proof infrared gas detector for monitoring combustible gasses and vapors. Our gas detector incorporates a stainless steel body and drift free optics. The durability and superior strength of our gas detector is built for harsh environments. When storing chemicals, you want to be sure to keep your chemical storage is safe and maintained. The Dräger Polytron IR gives you the degree of confidence to make you feel safe about your chemical storage.
Gas Detector – Hydrides
US Chemical is committed to performance chemical storage buildings and ensures that your chemical storage will be maintained. Our gas detector for hydrides is extremely durable and an accurate way to measure hydrides. The sensor type is an electrochemical sensor for maximum sensitivity detection rating. The Sensor life is around 1 to 2 years and it comes with a 1-year warranty.
Gas Detector - Ammonia (NEP)
Our Ammonia gas detectors for chemical storage buildings offer superior reliability and performance. Ammonia is a colorless gas or compressed liquid with an extremely pungent odor. Furthermore, it reacts violently with water and can damage the skin, eyes and respiratory system. Therefore, Ammonia Gas Detectors is a combustible gas detector, which are critical in some chemical storage situations. Our Ammonia Gas Detectors feature water and dust resistant, backlit LCD display, a CR2 Lithium battery, an audible and visual alarm and includes event and data logging.
Gas Detector - Dräger Polytron 5310 for LEL Detection - IR Sensor
The Lower Explosive Limit (LEL) Detection provides important information to determine a combustible mixture. The Dräger Polytron 5310 for LEL Detection is an electrochemical Sensor Technology with a field adjustable alarm level, in which measures combustion level. Extremely reliable detection of combustible gasses and vapors: the microprocessor-based Polytron 5310 transmitter is extremely accurate and effective and contains a durable, poison-resistant IR sensor. To Dräger Polytron 5310 4-digit backlit LCD display provides clear information. UL Listed and Approved. Class I, Division 1, Groups A, B, C, D: Class II, Division 1, Groups E, F, G: Class I, Zone 1, Group IIC.
Gas Detector - O2
The O2 gas detector is an audible, visual and vibrating gas detector alarm. O2 is also a gas that makes combustion happen. It itself is non-flammable; it magnifies combustion and enables all materials that are flammable in air to burn quickly. Furthermore, oxygen deficiency can occur in confined spaces so monitoring the oxygen level is crucial. The O2 Gas Detector detects oxygen and has a sensor range from 0 to 25% volume. The O2 Gas Detector includes a Lithium battery that has a 24 month battery life, adjustable alarm setting, and is water and dust IP67 rated for maximum security. Our Oxygen Gas Detectors also records the last 25 alarms for backtracking purposes. The Oxygen Gas Detector Standards for Class 1, Division 1, Groups A, B, C and D.
Gas Detector E.P. - Combustibles & LEL
Our Explosion Proof Gas Detection sensor is designed to detect and monitor combustibles over the range of 0 to 100% of lower explosive limit levels (LEL). The microprocessor based circuit is housed in an explosion-proof enclosure. The Explosion Proof Gas Detection is different from the non-explosion proof gas detector whereas, it can maintain the impact of an explosion. The Explosion Proof Gas Detector illustrates an LED display, LED indicators for statuses and a long sensor life expectancy. UL Approved Class I, Division 1, Groups B, C and D. Alarm Bell not included.
Heat Detector- Siemens 50 Hz ATEX
The Siemens 50 Hz ATEX Heat Detector has a high degree of reliability and stability. The Heat Detector is also highly resistant to humidity and corrosion and electromagnetic interference. The automatic heat detector is used for quality control and detecting heat and to create an early warning sign of rapid increase in temperature, smoke-forming flaming fires and smoldering fires in explosion-hazard areas of zone 1 and 2. The Heat Detector also provides maximum temperature alarm activation with quality thermo sensor. The Heat Detector is extremely reliable and durable.
Heat Sensor - Explosion Proof (194°F)
The Heat Sensor provides a reliable reading of heat in hazardous areas. The Heat Sensor is explosion proof and can withstand extremely high temperatures. With a low profile the explosion proof heat sensor is ULC listed for hazardous location Class I, Groups C and D, Class II, Groups E, F, and G, and Class III. Extremely strong and reliable, U.L. Listed sensor sends signal when temperatures reaches 194°F. This allows the sensor to send an alarm condition to the fire alarm control panel. The rate-of-rise element allows the sensor to be self-restoring.
Heat Sensor - Explosion Proof (135°F)
The Heat Sensor provides a reliable reading of heat in hazardous areas. The Heat Sensor is explosion proof and can withstand extremely high temperatures. With a low profile the explosion proof heat sensor is ULC listed for hazardous location Class I, Groups C and D, Class II, Groups E, F, and G, and Class III. Extremely strong and reliable, U.L. Listed sensor sends signal when temperatures reaches 135°F. This allows the sensor to send an alarm condition to the fire alarm control panel. The rate-of-rise element allows the sensor to be self-restoring.
Smoke Detector - Explosion Proof
Our Explosion Proof Smoke Detector is extremely reliable and has a surpassed amount of rugged construction. With a self-checking circuitry the smoke detector is designed for maximum sensitivity. The smoke detector circuit will send an alarm and shut off all air moving accessories when smoke is detected. During normal operation, the EP smoke detector samples Class I, Groups C & D, Class II Groups E, F & G. The Smoke Detector has a Voltage of 20 to 28 volts D.C. with relay contact. The smoke detector circuit will send an alarm and shut off all air moving accessories when smoke is detected. The detector light source is an IRED Infrared Emitting Diode.
Smoke Detector – Non Explosion Proof
The Non Explosion Proof Smoke Detector is a premium ionization smoke alarm 120 volt with battery backup. Highly reliable and extremely sensitive the non-explosion proof smoke detector senses both flaming and smoldering fires for superior protection. It includes 85 dB horn and relay for signal to other devices.